Cookie Sheet Magnet Board

Turn a $1 store cookie sheet into a decoupaged magnet board!

Posted by MadeByMarzipan

About

What do you get when you combine a dollar store cookie sheet and some paper scraps? A magnet board that’s a perfect fit for your budget and your craft space!

Supply Tip:
I bought this 9 x13 inch cookie sheet at my local dollar store. When choosing a cookie sheet for this project, it’s best to get one without a non-stick coating, because the spray paint will adhere better. Also, it’s best to select one with protruding handles, because it’s easier to hang.

Share

You Will Need (7 things)

  • Magnet(s)
  • Corner Rounder
  • Paint Brush
  • Mod Podge
  • Scrapbook Paper
  • Spray Paint
  • Cookie Sheet

Steps (9 steps, 50 minutes)

  1. 1

    I’m starting by giving my cookie sheet a couple coats of color. I’ve chosen a glossy spray paint in aqua. Spray outside, with a piece of wrapping paper or cardboard to protect your work area.

    It’s also important that you choose a warm day to do this, because the paint won’t apply smoothly on cold metal. Add a light coat, wait for the paint to dry, and apply a second coat.

  2. 2

    Once the cookie sheet is dry, measure the bottom to see how long to cut your paper strips. I’m using some scraps I have left over from another project. The manufacturer is Crate Paper and the line is called Pretty Party. I’m using strips that are 3 inches wide, as well as strips that are 1 inch wide.

  3. 3

    Since my cookie sheet has rounded edges, I’m using a corner rounder paper punch to trim the corners of my top and bottom pieces.

  4. 4

    Now we can adhere the paper. I prefer Mod Podge for this, because it thickens the paper a bit and provides a nice seal. Work with one strip of paper at a time, applying the Mod Podge directly to the cookie sheet. A thin coat works best.

  5. 5

    Smooth the paper strip on top of the Mod Podge. Rub the paper firmly and thoroughly, because this will reduce bubbling when you add the top coat.

  6. 6

    Continue adding the rest of the paper strips. Allow to dry completely.

  7. 7

    Next we’ll add a top coat of Mod Podge. Again, add it thinly. If you see streaks of white, that means it’s too thick, so brush that area again. Allow to dry.

  8. 8

    When your Mod Podge dries, you may notice some bubbling of your paper. To fix this, apply a small amount of Mod Podge to the gap. Work the bubble towards the nearest seam or edge, and rub it firmly with your finger until it flattens and seals.

  9. 9

    The rim on the cookie sheet’s back can serve as the hanger for the nail. Alternately, you could punch a hole in it with a hammer and nail.