Confetti Bow

Hello Sandwich’s Confetti Bow By Ebony Bizys

https://www.cutoutandkeep.net/projects/confetti-bow • Posted by Cicada

You will need

Approx 15cm x 20cm of Sticky Back Plastic for a medium-sized bow Confetti , or multicoloured scraps of paper/tissue paper to make your own Sticky Tape , or ribbon Scissors Ruler Hole Punch

Project Budget

Time

Difficulty

Description

Instructions

1. Cut a rectangle of sticky-back plastic measuring about 15cm x 20cm, depending on the size bow you desire (try 9cm x 12cm to create a smaller bow, or 21cm x 28cm for an XXL version).

2. 

   Peel the backing from the sticky-back plastic and sprinkle one half of the sheet with confetti. You can make multicoloured dots of your own by hole-punching into different coloured sheets of paper and/or tissue paper.

3. 

   Fold the blank side of sticky-back plastic over on top of the confetti side, trying to keep the plastic free from dreaded creases – remember when you used to cover your school books in this stuff?

4. At centre point of the longer side of the rectangle, squish the two edges together to form a bow shape, and fasten with sticky tape or a ribbon.