https://www.cutoutandkeep.net/projects/coffee-tin-organizers • Posted by Julie P.
This project is pretty simple, but the outcome is very useful and I find it very attractive. I buy all of my coffee at Trader Joes, and in the end, I always end up with these large coffee containers. While, I get the large containers, there are smaller ones too I might experiment with. The containers are sturdy, so I decided to dress them up a little bit and reuse them. I bought some paper from this gourmet type paper store around the corner from me called Hollander’s. I picked out a couple of beautiful sheets of paper months ago, and I was still looking for an excuse to use them. All I did was cover the coffee can with a sheet of this paper, making sure that the trees are growing in the correct direction. I used a basic Elmer’s-type glue. When doing this, the less glue the better, around the tip and bottom edges and the slowly gluing a little strip as you go around. Otherwise, the paper can get a little wrinkly. A bone flattener tool that is used in bookbinding could be helpful here to flatten out the glue bubbles.
This project is pretty simple, but the outcome is very useful and I find it very attractive. I buy all of my coffee at Trader Joes, and in the end, I always end up with these large coffee containers. While, I get the large containers, there are smaller ones too I might experiment with. The containers are sturdy, so I decided to dress them up a little bit and reuse them. I bought some paper from this gourmet type paper store around the corner from me called Hollander’s. I picked out a couple of beautiful sheets of paper months ago, and I was still looking for an excuse to use them. All I did was cover the coffee can with a sheet of this paper, making sure that the trees are growing in the correct direction. I used a basic Elmer’s-type glue. When doing this, the less glue the better, around the tip and bottom edges and the slowly gluing a little strip as you go around. Otherwise, the paper can get a little wrinkly. A bone flattener tool that is used in bookbinding could be helpful here to flatten out the glue bubbles.