Coffee Press Cozy

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  I was inspired by this Queen of Hearts Image I found by digital alchemy on the deviant art site.

• 

  Step 2

  Gather your supplies from the list

• 

  Step 3

  I started by cutting out red and black hearts a little larger than the size of a quarter. I cut one out then used it as a template for the rest by pinning it down and cutting around it.

• 

  Step 4

  Next I measured the height of the coffee press and cut the felt rectangle to size. If you buy the pre-cut felt squares, as I did here, there won't be enough fabric for it go around the entire container but that's okay, that's where the ribbon comes into play. I also cut out little notches so the handle can fit properly. But in the end, it wasn't really necessary :P

• 

  Step 5

  I pinned down each heart in a row and sewed down the center and all the way down with a backstitch. I removed the pins as I went along and tried to keep the hearts as straight as possible.

• 

  Step 6

  I then pinned together the dark beige sheet to the lighter beige sheet then use a whipstitch to sew the top and bottom of the cozy.

• 

  Step 7

  I cut six 4 inch pieces of ribbon and pinned them 3 to each side of the felt cozy, and then whipstitched both sides up!

• 

  Step 8

  Finally, I tied the felt cozy to the coffee press. It looks so cute!

• 

  Step 9

  Finished project!

Comments

Leave your comment