Clip In Kitty Ears With Bows

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  First you'll need to draw two triangles (as shown above) onto the backside of your double folded, faux fur. Make sure you leave about 1/2 an inch at the bottom of the triangles for gluing. My ears are approximately 3 inches wide at the bottom of the ear.

• 

  Step 2

  With right sides together (fur sides together), stitch around the top edge of the ears. You can do this with a sewing machine, or you can hand sew them together. If you're feeling lazy, you could just hot glue the pieces together.

• 

  Step 3

  Now flip the ears right side out. Make sure you use a pencil or turner to push the tip of the ear out so it's pointy. Stitch the bottom of the ear shut along the lines shown above.

• 

  Step 4

  Use the hot glue gun to add glue to the top side of the snap clips. I did this with the clips in the open position. Glue them to the bottom of the ears. Then trim the excess fur from around the clips.

• 

  Step 5

  Make two small ribbon bows and hot glue one to each kitty ear, and you're done!

• 

  Step 6

  Meow!

Comments

Leave your comment