Cable Wire Ring ;)

Get the cable . Wrap it around your finger . Here's a water-proofed ring .

https://www.cutoutandkeep.net/projects/cable-wire-ring • Posted by vann

You will need

1 Cable

Project Budget

Time

Difficulty

Description

Instructions

1. 

   Take out the metal wire out from the plastic wrapping . (optional)

2. 

   When choosing a cable , I prefer to use a cable with smooth and shimmery surface (left) rather than the one (right) with dull plastic surface . The one on the right hand side is dull in color and it has a rough texture which will rub your finger . I've tried to use it and make a ring then damn it pained my finger .

3. 

   Wrap the cable around your finger for 3 laps and pass the end of cable under them .

4. 

   Wrap the end of cable along the 3 circles for 4 laps .

5. 

   Pass the end of cable into the 4 circles and pull it out from the other side.

6. 

   Pull start and the end of cable and adjust the size of ring you want . Try on the ring again to see if it is fit .

7. 

   Finish!!!