Butt-On Down Shirt Apron
Turn a shirt in to an apron.
Posted by Aurum Press
About
Cook up a storm with this shirt-fronted apron. This is a great way to create a masculine version of a feminine garment, but if you still find pink too pretty for the boys, then make it in a more masculine blue check as I have done on the following page. Use as large a shirt as possible for the greatest coverage and the most practical benefit.
Share
You Will Need (9 things)
- Pin(s)
- Needle
- Sewing Machine
- Dressmaking Scissors
- Tailors Chalk
- Tape Measure
- Matching Thread
- 60 in (1.5 m) white Cotton Tape
- A large Shirt with a button-down collar
Steps (4 steps, 60 minutes)
-
1
Lay the shirt on a flat surface and measure 8 in (20 cm) down the shirt front from the neck and 43?4 in (12 cm) away from the central placket. Mark this point with tailors’ chalk. Mark a similar point 43?4 in (12 cm) from the placket on the
other side of the shirt. These points indicate the bib front of the apron. Draw curved lines from the neck, through the
marked points and out to the sides. Cut through both the front and back and along the lines to remove the sleeves (see pic. 1). -
2
Turn the shirt over and draw 2 lines, the first 3?4 in (2 cm) below the collar and the second 17 in (43 cm) below
the collar. Cut away the top of the shirt between the lines. Cut a line up the center back of the shirt and then open up the shirt. At the collar, turn under the raw
edge by 1?2 in (1 cm) twice and pin, baste, and machine stitch, so all you see at the top of the apron is a collar. Turn under the raw edges on the apron by 1?2 in (1 cm)
twice and pin, baste, and machine stitch. Top stitch over this seam to stop the curved edges from curling in (see pic. 2). -
3
Cut 2 lengths of 30 in (76 cm) of white tape. Turn under one end, pin, and then sew them on as apron ties to the top corners of each side of the apron back (see pic. 3).
-
4
Tip
Aprons will, of course, get dirty, so choose shirts that can withstand frequent washing, such as cotton.