Bling! Rhinestone Ipod Cover

About

You Will Need (8 things)

Steps (6 steps, 120 minutes)

1. 1

   Collect all the things you'll need

   The Rhinestones vary in cost depending on quality and brand. swarovski it the most expensive I know of but I prefer these but any will do

   You may also want some small bowls to sort sizes and colors into

   Don't forget to cover you work space!

2. 2

   Plan your design

   Use your double sided tape(or ordinary) place it on the areas you want to rhinestone set the rhinestones on.
   (Try do this neater than my quick example :p)

   Now you know your design will fit.

3. 3

   Carefully peel the tape off in one piece or sections. keep the rhinestones on so you can use them as a guide and can easily keep track of them when your gluing

   or

   Sometimes I like to just balance the stones on a small area and take a photo and just refer to it on the camera

4. 4

   Follow the instruction on the back of your glue packet.

   Use mixing stick included or match stick/toothpick ect... Glue a small line on the case. Quickly stick the stones on and gently push down on them.

   I used clear Araldite glue it comes in 2 parts and only activates when both parts are mixed. This is handy cos the glue doesn't dry in the tube.
   also The longer a glue takes to dry the stronger it is or so I'm told.
   The one I used took 3 days to bond properly

5. 5

   Use the que tips and nail polish remover to clean up stray glue.

6. 6

   Show it off to all non sparkly ipod people :)