Beer Tote

Build a Simple Tote for Da Beers

https://www.cutoutandkeep.net/projects/beer-tote • Posted by Rogue Engineer

What better way to brighten someones day than with great beer and a DIY beer tote! Arrive to that Christmas party in style with this easy beer tote that you can build in under an hour. Similar totes sell for up to $50, but you can build this one for half the price! For the project plans, cut list, and printable PDF visit: http://rogueengineer.com/diy-beer-tote-plans/

You will need

½ ″ x 6″ x 48″ ( Oak Hobby Board) ¼ ″ x 2″ x 48″ ( Oak Hobby Board) 1 ″ x 3″ x 12″ ( Oak Board) Wall Mounted Bottle Opener Galvanized Handle (3/4″ width) 2 2-1/2″ Kreg Pocket Hole Wood Screws

Project Budget

Time

Difficulty

Description

What better way to brighten someones day than with great beer and a DIY beer tote! Arrive to that Christmas party in style with this easy beer tote that you can build in under an hour. Similar totes sell for up to $50, but you can build this one for half the price! For the project plans, cut list, and printable PDF visit: http://rogueengineer.com/diy-beer-tote-plans/

Instructions

1. 

   After cutting all the boards according to the cut list diagram (found on rogueengineer.com) I glued and nailed one side to the base and top.

2. 

   Then I glued and nailed the other side on using 1-1/4" brad nails.

3. 

   It may have been easier to sand and finish everything before assembly but I didn't so this is when the sanding and staining took place.

4. 

   Now the 1/4" thick side pieces get nailed in place.

5. 

   Finally, the handle and bottle opener get screwed in place.