Bedroom Lamp From Old, Broken Toys

Do not throw away old toys - make a lamp from them

Posted by Pawel D.

About

I don't like to just throw away things. I always try to recycle them into something new, so this is the main reason I decided to make a bedroom lamp from old, used, broken toys.

Share

You Will Need (6 things)

  • Plastic Pipe
  • Gluegun
  • Drill
  • Toys
  • Wire
  • Light Bulb

Steps (5 steps, 60 minutes)

  1. 1

    If You wonder how such lamp could look - skip to the last step or see the video attached to this instruction.

    What will be needed ?

    - Scrap of wood for the bottom
    - Not very big pipe (pcv or any kind)
    - wire with plug
    - bulb holder
    - old toys (even broken)
    - glue gun
    - drill
    - spray paint (I recommend gold one)

  2. 2

    Lamp is made from two main parts: the bottom and the pipe.
    The bottom can be made from plywood, scrap of wood, even from plastic. Whatever You have at home and is strong enough to hold the whole lamp.

    The pipe is the thing in which the wires will come. It could be ordinary pcv pipe as used in water or heating systems. Easy to buy at any market. I didn't have such thing, so I've used the piece of branch which I've drilled with the drill. Anyway, I recommend the first option - to use the pcv pipe. It won't be visible at the end.

    In this step You have to drill the hole in the middle of the bottom and then glue the pipe to the bottom with glue gun.

  3. 3

    Now, when the lamp frame is ready, You have to glue the bulb holder to the top of the pipe. Don't save the glue-it have to be well connected.
    When the glue will cool, get the wire and put it through the hole in the bottom and through the pipe.Connect wire to the bulb holder - it is easy just two wires into two pin holes.

    Now comes the fun part.

    Take all small toys prepared for the project and glue them to the bottom and to the pipe. Use Your imagination. If You have for example enough toy soldiers they can fight each other. Be creative.

    One thing to remember. It is good to place the bigger toys in the bottom, then the whole construction will be stronger.

  4. 4

    When You finish gluing take the spray paint and use it on the project.

  5. 5

    That's all. Now put a lampshade on Your bedroom lamp and put it in Your's kids bedroom.