Cut Out + Keep

Basic Trousers With Pleats

Fashion Patternmaking Techniques

https://www.cutoutandkeep.net/projects/basic-trousers-with-pleats • Posted by Promopress

Measurements: - Hip circumf. 92+2-4 cm ease. - Waist circumference 68+1-2 cm ease. - Hip length 20 cm. - Body rise 24 cm. - Trouser length 105 cm

You will need

Project Budget
Cheap

Time

2 h 00

Difficulty

So-so
Medium 106739 2f2015 01 12 125223 tdm%2b111 01

Description

Measurements: - Hip circumf. 92+2-4 cm ease. - Waist circumference 68+1-2 cm ease. - Hip length 20 cm. - Body rise 24 cm. - Trouser length 105 cm

Instructions

  1. Small 106739 2f2015 01 12 125217 tdm%2b111 02

    Front - Draw a rectangle A-B-C-D, with A-B equal to ¼ Hip circumference (e.g.: 92:4 = 2 cm) and A-C equal to total trouser length (e.g.: 105 cm). - A-E is the body rise measurement (24 cm) - B-F is the same as A-E. - E-E1 = 1/16 the Hip circumf. minus 1.5 cm (e.g.: 92:16 = 5.7 - 1.5 = 4.2 cm). - A-G is the Hip length measurement (20 cm). - Draw G-H (Hip line). - E-I is the same as A-E. - Draw I-L. - E1-X = half of E1-F (e.g.: 23+4.2 = 27.2:2 = 13.6 cm) - Draw M-N passing through X and X1, and write PLEAT LINE and GRAIN. - M-O = Knee height (e.g.: 60 cm). - M-M2 = 7 cm. - Draw the darts with the length and width required. - B-B1 = 1 cm. - X1-L1 = 12 cm. - X1-I1 like X1-L1 (THIGH). - N-N1 = 1 cm. - N-C1 = 11 cm (or as desired). - N-D1 like N-C1. - Draw C1-N1-D1 (BOTTOM). - Draw E1-G-A1 with a curved line. - Draw E1-I1-C1 shaping it nicely. - Draw B1-A1 shaping it nicely and write WAIST. - Draw B1-H-F-L1-D1, shaped nicely.

  2. Back - Draw a rectangle A-B-C-D, with: - A-B equal to ¼ Hip circumference + 2 cm (e.g.: 92:4 = 23+2 = 25 cm) and A-C equal to total trouser length (e.g.: 105 cm). - A-E is the body rise measurement (e.g.: 24 cm). - B-F is the same as A-E. - E-E1 1/16 Hip circumference + 3 cm. (e.g.: 92:16 = 5.7+3 = 8.7 cm). - E1-E2 = 1 cm. - E-E3 = 2 cm. - A-G is the Hip length measurement (e.g.: 20 cm). - Draw G-H (Hip line). - E-I is the same as A-E. - Draw I-L. - E1-X = half of E1-F (e.g.: cm 26+9 = 35:2 = 17.5). - Draw M-N passing through X and write PLEAT LINE and GRAIN. - M-O Knee height. (e.g.: cm 60). - A-A1 = 3.5 cm. - A1- A2 = 1-3.5 cm. - B-B1 = 1 cm (check waist curves). - B1-B2 discard = ½ B1- A2. - Draw the darts with desired length and width. - X1-L1 = 13 cm. - X1-I1 like X1- L1 (THIGH). - N-n1 CM 1. - N-C1 12 cm (or as desired). - N-D1 like N-C1. - Draw C1-N1-D1 (BOTTOM). - Draw E2-G-A2 with a curved line. - Draw E2-I1-C1 shaping it nicely. - Draw B1- A2 shaping it nicely and write WAIST. - Draw B1-H-F-L1-D1 shaped nicely.