About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
2h30

a small amount of felt and fabric brings this little guy to life!
Before you begin, print out the templates so the complete image is a finished size of 9 x 14 cm, that should make them the correct size to work with.

Posted by lucykatecrafts from Oakham, England, United Kingdom • Published See lucykatecrafts's 7 projects »
Tags

Downloads
  • ptemplatesbaby.jpg 23.9 KB [ Download ]
PrintEmbed
  • How to make a penguin plushie. Baby Penguin - Step 1
    Step 1

    For the body cut two shapes ,using the template provided, from the felted wool. Pin, right sides together and stitch, roughly 0.5cm away from the edge leaving the turning gap open. Turn the body right side round, and fill with the stuffing. Keep going until you are happy with the shape. Make a well within the base of the stuffing for the pebble. Pack the pebble in place by adding a bit more stuffing and finish off by cutting a small oval shape from the card (cut this by eye as it’s hard to give an exact size due to the felted wool stretching when stuffed) and place it just inside the open end. Cut the base piece from the felted wool, place it over the open end to cover the hole and secure in place with random straight stitches.

  • How to make a penguin plushie. Baby Penguin - Step 2
    Step 2

    Place the felted wool for the wings wrong side together with the fabric. Cut out one wing through both layers. Flip the template and cut the second wing. Sew around the edge of each wing using blanket stitch. Attach one wing to each side of the penguin with a small button, positioning them fabric side facing out, with the more curved edge towards the front of the penguin.

    Cut two circles for the eyes from the felted wool and stitch onto the face with one of the small buttons in the center of each eye. Cut out the beak, fold in half and attach along the folded edge with random straight stitches. From the fabric, cut out a tummy piece and sew into place again with random straight stitches.

  • How to make a penguin plushie. Baby Penguin - Step 3
    Step 3

    To make the fish, cut 2 fish shapes from the craft felt, join the 2 together by sewing blanket stitch round the edge. Add a small french knot to each side for an eye.

    Your little penguin is now complete. You can make as many babies as you like! (sewing wise I mean, not literally!)

    The patterns for the parent Penguins are on my blog, 'Lucykate Crafts...'

Made this project? Share your version »

Comments