https://www.cutoutandkeep.net/projects/alice-in-wonderland-3 • Posted by Beverly
Gather your materials!!
Pick out a picture of Alice and cut it oval. Now, smooth out the DAS clay and cut around the photo with a razar blade.
It should be the same size so the picture can fit exactly.
Make a hole for the chain to fit through. & Smooth out the clay for any bumps with a cotton swab and water.
Paint the clay with any color you desire. *Remember paint both sides*
When dry, put a glue called "Glossy Accents" ontop so it can have shiny texture. *on both sides*
Hole punch the pictures together.
Put Mod Podge on one side of the clay so you can put the picture on smoothly.
Place the image on quickly, and make sure the holes line up.
Now, repeat the step. Put Mod Podge on the clay and put the image on.
Place two coats of Mod Podge for each of the images so it can have a glossy finish.
Get the rhinstones you desire and place them around the images with Krazy glue. *BE VERY CAREFUL WITH THIS STEP :)*
Place the chain inside the hole..... Here's the side with Alice =]
Here's the side with the Mad Hatter. You can where it either sides!! ENJOY :D