About

Cost
$ $ $ $ $
Difficulty
• • • •
Time
10 mins

Use dried lavender to make this simple, rustic wall art in under 10 minutes!
Made with a few simple supplies, this lavender frame is a cute way to decorate for spring.

Posted by Temperance Rose from Melbourne, Victoria, Australia • Published See Temperance Rose's 7 projects »
Tags

PrintEmbed
  • How to make a framed decoration. 10 Minute Diy Provincial Dried Lavender Frame - Step 1
    Step 1

    To begin, remove the back of the frame.

  • How to make a framed decoration. 10 Minute Diy Provincial Dried Lavender Frame - Step 2
    Step 2

    Carefully lift the glass out of the frame. Then, use your hot glue gun to apply a layer of glue around the frame.

  • How to make a framed decoration. 10 Minute Diy Provincial Dried Lavender Frame - Step 3
    Step 3

    While the glue is still drying, quickly pop your glass back in to the frame. Apply gentle pressure until the glass has stuck to the frame.

  • How to make a framed decoration. 10 Minute Diy Provincial Dried Lavender Frame - Step 4
    Step 4

    Next, grab your dried lavender. Remove any leaves along the stem until you’re left with a bare stem, then trim the stems so they’re roughly the same length. Use jute twine to tie your lavender into a bunch.

  • How to make a framed decoration. 10 Minute Diy Provincial Dried Lavender Frame - Step 5
    Step 5

    Apply a generous amount of glue to the back of the stems and jute twine. Press the lavender on to the glass, applying gentle pressure until the glue dries (this takes a minute, tops). If you have trouble with this step, try to fan out the buds of your lavender in such a way that they lay flat on the side you want to glue down.

Made this project? Share your version »

Comments