• All
  • Wearables
    • Dresses
• A to Z
• Contests
• Crafty Superstars
• 

Share on: Facebook | Twitter | StumbleUpon

Add to a List Add to Favorites Add Your Version

1. 

   

   That's pretty much all you'll need. The pantyhoses are gonna be ripped and pulled over legs and arms.

2. 

   

   If you don't already have one, make a template with a nicely fitting dress or longshirt and add a little pin where you want the skirt-part of the dress to start soo you can adapt that border to the shirt-part.
   
   Did at least one of you understand that? ._. I think I suck at explaining today...




3. 

   

   What you're gonna do: Get the first shirt, place the template on it ( it's gonna be a neckholder, so you can place it on the very top ( with seam allowance of course ) if the shirt. First, cut off the part that's left on the bottom of the shirt so you'll have a rectangle. ( see, the smaller one of both ) Keep it the width of the original shirt! Cut the upper part that will be the top part of the dress.
   
   Then take the other shirt and cut another rectangle with the bottom seam, make it longer than the other rectangle. Use picture if you don't know what I'm trying to say. >____<
   
   Grab the remaining side parts you cut off the 1. shirt and cut about 1 inch strips. As many as you want. 2 are gonna be needed as the dress straps ( maybe make those a little bit thicker ), the rest will be for the dekolletée and further decoration, e.g. wrist bands and stuff. Just pull on the flat striped to make them roll into nice straps.

4. 

   I didn't make pictures of the following steps because I heavily screwed up there. -.-
   
   First, sew the top part sides close and decide which side will be the back. Cut off the top part of the backside. Easy. Hem the upper part, adding the holder straps to the highest point on the front.
   
   Then, do the pain in the ass part: take the two skirt-to-be rectangles, line them up so the bottom seams of the shirt are the bottom ones of the skirt. Savvy?
   Cool. Get a loooong thread, stitch about 1/4 inch stitches around the upper border so you can... aah, lack of english terms... shirr (?) the skirt.
   
   Line this up with the top part and sew. I can't really help you here cause I was lost myself ( and you can tell that from looking at the dress... :/ ) Just turn the top onside out and pull it over the skirt part ( which should be right side up ).
   
   SEW HERE!
   _ | _______ top front
   _ | ___ shorter rectangle front
   _ | _____ longer rectangle front
   _ | _____ longer rectangle back
   _ | ___ shorter rectangle back
   _ | _______ top back
   SEW HERE!
   
   Get it? :P




5. 

   

   If you managed this, you're the hero! Really! Be friggin proud.
   
   Now I guess you could already wear the dress.
   
   But me, I wanted a more rotten look. ;)
   
   Since the fabric was very see-through in the first place AND I needed a ligning of the front for my original plan, I just sewed another rectangle of leftover shirt fabric to the inside.
   
   The I drew a triangle shape from the upper hem down a few inches, pinned the two front layers together, cut out this part of the fronts front layer ( o.O ) and randomly added strips ( we made them earlier, remember? ), secured them with pins and then just went over all of it with a zigzag stitch, randomly going crazy on the bottom of the triangle.

6. 

   

   You're done... for now!

See more Dressmaking / Tailoring or Zombies

See the projects A-Z »

Popular tags: Painting & Decorating, Revamping, Dressmaking / Tailoring, Clothing & Fabric, Gothic, Christmas, Decorating, and Halloween

Get the latest projects!
Become a Fan on Facebook
or
Follow us on Twitter

Site Map © Cat Morley & Contributors 2009 | Stumble This