About
You'll be on cloud nine once you've finished!
This shelf isn't too difficult to do if you have used a jigsaw before! it's always handy to have an extra pair of hands to help you hold the wood while you are cutting out the shapes or clamp it down
Tags
-
Becky favorited Wooden Cloud Shelf
16 May 23:34
-
Jennifer J. favorited Wooden Cloud Shelf
17 Sep 09:00
-
Rebecca M. favorited Wooden Cloud Shelf
18 Jun 00:47
-
Pimke added Wooden Cloud Shelf to Holz
26 Jan 14:20
-
Hayley favorited Wooden Cloud Shelf
04 Dec 04:30
-
Angie B. favorited Wooden Cloud Shelf
15 Nov 07:59
-
Emmy S. added Wooden Cloud Shelf to DIYY
09 Nov 03:58
-
Rachel F. favorited Wooden Cloud Shelf
28 Sep 22:09
-
llamadandoalandroide favorited Wooden Cloud Shelf
09 Sep 03:40
-
shayna.king.14 added Wooden Cloud Shelf to Room Decor
22 May 22:45
You Will Need
-
Step 1Cut out a length of wood for the main part of your shelf (mine was 40cm long). You will also need 2 cloud shapes - one large cloud which is slightly bigger than the length of your shelf and one thats about half the length of your shelf.
Then cut the large cloud so that the bottom is the same length as the shelf but keep those end parts as you will need them later.
Sand your piece down and then you will be ready to assemble your shelf.
-
Step 2Then using your corner plates, screw the large cloud to the base of your shelf on both sides. This will make your shelf sturdy
-
Step 3Take your two left over bits of the cloud and cut a smaller gap in each and this will left them sit flush against your cloud with the screws inside
-
Step 4Glue the ends back onto the large cloud and fill in the gaps with glue so they create a smooth surface
-
Step 5Glue your small cloud to the other side of your base, picking either the left or right hand side of your shelf
-
Step 6Give your shelf a couple coats of white paint to finish it off
-
Step 7
Screw some picture hooks into the top of your large cloud and then you can use these to nail your shelf into the wall
-
Step 8Fill with your favourite toys and books but test it out before putting anything too heavy on it
Comments
