About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
25 mins

Triple Strand Chain & Pearl Necklace
The Procedure comprises of 3 parts – making the gold chain, making the floating necklace and then assembly.

Posted by Divya N. from Chennai, Tamil Nadu, India • Published See Divya N.'s 7 projects »
PrintEmbed
  • How to make a pearl necklace. Triple Strand Chain & Pearl Necklace - Step 1
    Step 1

    Make the gold chain – Chain maille
    (i)Open one big jump ring; add 2 more closed ones in it and close. Open the third ring and add a closed ring and close.
    (ii)Continue this process of adding rings one by one till you have a chain that over 18 inches long. You can either use one size rings or alternate with 2 sizes like I have done here

    Make the floating necklace
    a) Cut 20 inches of beading wire (I choose dull bronze to match with my crimps). Open a crimp end and insert it into one end of the wire. Add a couple of crimps and turn the insert the wire into the crimps. Crimp flat with a crimp pliers or nose pliers. Now close the crimp ends, locking the wire inside and press firmly. If any extra wire (second length) is hanging out, trim it.
    b) Add crimps and pearls onto the wire and crimp as you go in the following sequence. Always remember to add the crimp first, crimp it and then add the pearl otherwise it will keep on moving
    Crimp-gray pearl- crimp SPACE Crimp-white pearl- crimp SPACE Crimp-gray pearl- crimp SPACE Crimp-white pearl- crimp SPACE Crimp-gray pearl- crimp
    c)Finish with a crimp end using the process listed above in (a). The finished piece must look like the first image in the assembly sheet

    "SPACE" refers to leaving the wire blank for a certain measured space

  • How to make a pearl necklace. Triple Strand Chain & Pearl Necklace - Step 2
    Step 2

    Assembly
    1)Open one big jump ring; add one end of the pink chain, gold chain and the crimp end along with an extra jump and close
    2)Do the same on the other side but add a lobster clasp instead of the extra jump ring. Your triple strand Chain & Pearl necklace is ready to wear

Made this project? Share your version »

Comments

More Projects