The Key To Peace Necklace

Make a key to peace necklace

All supplies and tools are for sale at Ornamentea.com

Share on: Facebook | Twitter | StumbleUpon

With your chain nose pliers gently open one link of the chain. Remove from the chain and set aside. Repeat until you have created three knurled chain jump rings. Divide remaining chain into two 10 inch segments. Set aside.
Thread the wire through the hole in the peace pendant and create a wrapped loop. Thread a bead onto the wire and loop the other end of the wire. Use remaining wire to loop remaining beads and attach the two looped beads to one another as shown.

With your chain nose pliers open one of the knurled jump rings. Thread through the key and through one of the looped glass beads. Close securely. Thread a second knurled jump ring through the hammered ring and through one of the looped glass beads. Close securely.
Attach peace pendant to hammered ring with remaining knurled jump ring as shown.

With your chain nose pliers open the end link on one of the 10 inch chain sections and attach it to the hammered ring. At the other end of the chain section open a link to attach the toggle bar. Close both links securely. Repeat to attach remaining 10 inch chain section and the toggle loop.