About
soda can, upcycle, decor , accessories, candle holder, holder, cheap,
Inspired by a upcycled decorative items found in the recycled center...
-
Sunnie favorited Soda Can Holder
15 Feb 17:17
-
Holly S. favorited Soda Can Holder
09 Feb 08:27
-
Kay L. added Soda Can Holder to CRAFT ideas
08 Mar 18:20
-
karmy_2683 favorited Soda Can Holder
03 Aug 07:09
-
lisa l. favorited Soda Can Holder
03 Aug 02:08
-
Monochrome Luck favorited Soda Can Holder
06 Aug 02:09
You Will Need
-
Step 1Cut the top of the soda can with a knife
-
Step 2Beware! This can be very sharp!
-
Step 3Cut the sode bottle into strips!
-
Step 4I've cut into 36 strips.. it depends on the pattern you plan to make
-
Step 5Slightly twist the strips and tie into a little pony tail using short can strips ( you cut from the top portion earlier)or you may use a fine wire
-
Step 6Something like this!
-
Step 7Use a tweezers to hold the tip of the strip and roll it all the way down like opening a sardine can.
-
Step 8Like this!
-
Step 9As I said earlier... I have 32 strips and I made a 'pony tail' out of 4 strips...so I have 8 patterns when I'm done. You can change to 62 strips and made something more define like a quilling pattern... that will be WOW!
-
Step 10Repeat the sbove steps until you done with all the strips...and let's have a soda! Happy trying!
Comments
