Soda Can Holder ∙ How To by Pei Ching L. on Cut Out + Keep

Time:0h30

Nice & Simple

Pei Ching L.

Butterworth, , Malaysia

2011

soda can, upcycle, decor , accessories, candle holder, holder, cheap,

Inspired by a upcycled decorative items found in the recycled center...

1

Cut the top of the soda can with a knife
2

Beware! This can be very sharp!
3

Cut the sode bottle into strips!
4

I've cut into 36 strips.. it depends on the pattern you plan to make
5

Slightly twist the strips and tie into a little pony tail using short can strips ( you cut from the top portion earlier)or you may use a fine wire
6

Something like this!
7

Use a tweezers to hold the tip of the strip and roll it all the way down like opening a sardine can.
8

Like this!
9

As I said earlier... I have 32 strips and I made a 'pony tail' out of 4 strips...so I have 8 patterns when I'm done. You can change to 62 strips and made something more define like a quilling pattern... that will be WOW!
10

Repeat the sbove steps until you done with all the strips...and let's have a soda! Happy trying!