Skyline Tee

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Plug in your iron and gather materials.

• 

  Step 2

  Lay your tee on a flat surface that is a good place to iron and craft. Place stud trim on sleeve from shoulder point to edge and cut trim to fit.

• 

  Step 3

  Repeat this procedure below initial strip of studs, until you've cut enough strips to fill the sleeve, leaving some at faried lengths. This will give your styline effect.

• 

  Step 4

  Next, line up the trim on the shoulder seam and armhole seam vertically. Cut out (3) pieces as long as you wish. Ours are about 3 1/2".

• 

  Step 5

  Lay a pressing cloth or a blank piece of paper over your strips and press with an iron for about 25-30 seconds. *Recommended: Turn your tee inside out and press from the back for an additional 30 seconds. Repeat this 2 times.

• 

  Step 6

  Cut 4-5 strips of studded trim in varying lengths. These will be used for the bottom of the tee.

• 

  Step 7

  Arrange strips at the right side of the tee shirt hem as pictured. Repeat ironing process.

• 

  Step 8

  Let your tee cool completely (the studs get really hot!).

• 

  Step 9

  Try it on and Enjoy!!!

Comments

Leave your comment

Lolly.Bot · Enfield, England, GB 12th December 2009

This is cuuuuuuuuuute xxx <3

Reply