About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
3h00

Add Sharp Lighting to a Dull Room.
Create a chandelier using mix and match flatware cutlery.

Posted by BarryBelcher from Atlanta, Georgia, United States • Published See BarryBelcher's 41 projects »
Tags

PrintEmbed
  • How to make a hanging light. Sharp Lighting - Step 1
    Step 1

    Drill small holes in the tips of every knife using a metal drill bit. Be sure to spray WD-40 on the area where drilling as a lubricant.

  • How to make a hanging light. Sharp Lighting - Step 2
    Step 2

    Find a base to an old casserole dish or something similar as the base for the top of your chandelier's knives to hang.

  • How to make a hanging light. Sharp Lighting - Step 3
    Step 3

    Hook 2 hanging flower pot chains at equal length across from each other on the base then take another chain and hook evenly from the other 2 chains to a ceiling hook.

  • How to make a hanging light. Sharp Lighting - Step 4
    Step 4

    Use metal wire and create a hook through the hole drilled in each knife tip.

  • How to make a hanging light. Sharp Lighting - Step 5
    Step 5

    Hang knives evenly around the casserole metal base.

  • How to make a hanging light. Sharp Lighting - Step 6
    Step 6

    Remove the clamp and shade from the clamp lamp.

  • How to make a hanging light. Sharp Lighting - Step 7
    Step 7

    Twine wire and bulb holder down the center of knives and up the chain hanging from ceiling hook.

  • Step 8

    Watch me make this here or follow instructions below.

  • How to make a hanging light. Sharp Lighting - Step 9
    Step 9

    Plug it in to add sharp lighting in a dull room.

Made this project? Share your version »

Comments

More Projects