About
MADE OF BIKE PARTS!!!
I ATTENDED A BIKE RACE THAT WAS FUNDED BY LINGERIE AND ADULT VIDEO STORES. NEDDLESS THE SAY THE PRIZES WERE DELIGHTFUL ;) I DECIDED TO SHOW UP WITH SOMETHING DIFFERENT AND CREATIVE. I DIDNT PLACE IN THE RACE BUT I WON A PRIZE FOR MY SEXY OUTFIT!! PS. FORGIVE ME IF THE INSTRUCTIONS ARE SLOPPY I KINDA WINGED IT. FIRST CORSET I EVER MADE
Tags
-
pandanomz favorited Sexy Corset
08 Sep 19:12
-
Step 1FIRST TO GET EVERYTHING READY I MEASURED AND TRACED ONE OF MY CORSETS TO GET A PATTERN. THEN I PINNED IT TO SOME BLACK FABRIC AND CUT IT OUT
-
Step 2I MEASURED THE EDGE OF EACH PIECE OF FABRIC SO I KNOW HOW LONG THE WIRES SHOULD BE. THEN I CUT THE WIRE HANGER AND MADE LITTLE SLITS FOR THE WIRES OUT OF THE BLACK FABRIC
-
Step 3I CUT THE TUBE STRAIGHT UP THE MIDDLE AND TRIED TO FLATTEN IT WITH THE IRON AS MUCH AS POSSIBLE (ITS NOT VERY EASY) THEN I PINNED AND SEWED IT TO MY BLACK FABRIC AND CUT AROUND THE EDGES
-
Step 4NOW FOR THE BOOBS!! I JUST USED AN UNSUSPECTING HOUSEHOLD COFFEE MUG THAT HAPPENED TO FIT AROUND MY BOOBIE TO MEASURE THE FABRIC THAT I WOULD USE FOR MY BUST. AND I DID THE SAME AS THE PREVIOUS STEP, FLATTENED THE TUBE AND PINNED, SEWED, AND CUT IT TO THE SHAPE OF THE FABRIC
-
Step 5NOW THE NIPPLES.. I JUST CUT THE PRETA VALVE OFF THE TUBE AND LEFT A LITTLE TUBE ON EITHER SIDE
-
Step 6I THEN CUT THE SHOE SO I COULD USE THE LACE HOLES FOR THE BACK OF MY CORSET. PIN AND SEW
-
Step 7I RUFFLED UP MY BAR TAPE THE WAY I WANTED AND SEWED IT BY HAND ON TO THE TOP OF MY "BOOB" THEN POKED A HOLE WHERE THE NIPPLE SHOULD BE AND STUCK THE VALVE THROUGH IT AND HOT GLUED IT ON THE INSIDE. THE REASON I DIDNT SEW THAT PART IS BECAUSE I DIDNT WANT THE THREAD TO SHOW ON MY BREASTESSES
-
Step 8SO I BASICALLY JUST SEWED EVERYTHING TOGETHER AND TOUCHED IT UP WITH THE HOT GLUE GUN HERE AND THERE. AND THIS IS WHAT I GOT!! :)
hey congreatulation of the sexy prize!!!!! You deserved it!!!
super cool!!!!