About
Patchwork Bags
Large holdall Size: approximately 45 x 46cm (17¾ x 18in) Level of difficulty
Materials
Cotton fabric, about 110cm (44in) wide:
A: 10cm (4in) rose fabric with
blue background
B: 10cm (4in) rose fabric with
red background
C: 10 x 55cm (4 x 21½in) fabric with
small roses
D: 10 x 55cm (4 x 21½in) fabric with
large roses
E: 50cm (20in) blue fabric for the sides
and borders
F: 40cm (16in) red fabric for borders
and binding
G: 70cm (27½in) coordinating fabric
for lining
Wadding and interfacing:
35 x 90cm (13¾ x 35½in) lightweight
fusible wadding
100 x 90cm (39½ x 35½in) heavyweight
fusible wadding
10 x 48cm (4 x 19in) lightweight fusible
pelmet interfacing
Additional items:
pair of blue leather bag handles 70cm
(27½in) long
straight patchwork ruler, rotary cutter and
self-healing cutting mat
Fabrics A–D are cut into 9cm (3½in) squares. You need 24 squares in all so you could use a charm pack of coordinated fabrics for these, cutting the 12.5cm (5in) squares down to size.
utting out
The following measurements include a 0.75cm (¼in) seam allowance.
Fabric A:
10 squares 9 x 9cm (3½ x 3½in)
Fabric B:
6 squares 9 x 9cm (3½ x 3½in)
Fabric C:
4 squares 9 x 9cm (3½ x 3½in)
Fabric D:
4 squares 9 x 9cm (3½ x 3½in)
Fabric E:
10 strips 3.5 x 110cm (13/8 x 43½in) for borders
2 strips 12 x 42cm (4¾ x 16½in) for the bag sides
Fabric F:
4 strips 4.5 x 50cm (1¾ x 19¾in)
4 strips 4.5 x 42cm (1¾ x 16½in)
18 strips 4.5 x 15cm (1¾ x 6in)
1 strip 4 x 135cm (1½ x 53in), joining pieces as necessary to make up the length
4 strips 3.5 x 25cm (13/8 x 10in) for the ties
Fabric G:
2 rectangles 42 x 48cm (16½ x 19in) for the front/back lining
2 strips 12 x 42cm (4¾ x 16½in) for the side lining
2 strips 12 x 48cm (4¾ x 19in) for the base and base lining
Lightweight fusible wadding:
18 strips 4.5 x 15cm (1¾ x 6in)
4 strips 4.5 x 42cm (1¾ x 16½in)
1 strip 4 x 90cm (1½ x 35½in)
1 strip 4 x 45cm (1½ x 17¾in)
-
Helena S. favorited Rose Windows Bag
24 Apr 08:15
-
pandanomz favorited Rose Windows Bag
08 Sep 12:57
-
Alecia B. favorited Rose Windows Bag
23 Aug 06:16
-
Jenny C. favorited Rose Windows Bag
20 Feb 03:08
-
Lydia H. favorited Rose Windows Bag
29 Aug 06:59
-
Willow Bon-Bon added Rose Windows Bag to Mary Poppins
03 Aug 14:28
-
greenstyle added Rose Windows Bag to Sewing
10 Jul 02:37
You Will Need
-
Step 1
Fold each of the four tie strips (fabric F) lengthways, right sides together, and sew together along the long open edge. Turn the strips out, tuck in the seam allowance at one end and sew up the opening by hand.
-
Step 2
Fuse a corresponding strip of wadding to the wrong side of each of the 4.5 x 42cm (1¾ x 16½in) and 4.5 x 15cm (1¾ x 6in) strips of fabric F. Fold the strips lengthways, wrong sides together, but do not iron. Place the patchwork ruler on top of each strip so that the 1.5cm (5/8in) mark is lying on the fold. Trim the folded strips to 1.5cm (5/8in) wide using the rotary cutter and cutting mat.
-
Step 3
Sew a 3.5cm (13/8in) strip from fabric E to the top and bottom and then to the left and right of each floral square, trimming the strip to length after attaching it to each side.
-
Step 4
Lay out the 24 squares to make two blocks of 3 x 4 squares. Sew the squares together in rows, placing a short folded F strip between each pair so it is caught in the seam. Now join the rows with a 4.5 x 50cm (1¾ x 19¾in) strip of fabric F between the rows (see the photograph). Trim the long strips to fit as necessary then fuse heavyweight wadding to the back of each patchwork panel and trim to fit. Quilt both panels by stitching in the ditch (sewing along the seam lines).
-
Step 5
Cut and fuse heavyweight wadding to the 12 x 42cm (4¾ x 16½in) bag sides (fabric E). Back one 12 x 48cm (4¾ x 19in) rectangle of fabric G first with the pelmet interfacing and then with heavyweight fusible wadding. This will be the base.
-
Step 6
Lay out each patchwork panel, right side up. Pin a long folded F strip to each side edge, matching the raw edges. Pin a tie 7cm (2¾in) from the top of each side edge, matching the unfinished end to the edge of the patchwork. Tack the layers. Now stitch the patchwork panels to the sides and base, beginning and ending the stitching 0.75cm (¼in) away from the edges (Y-seams).
-
Step 7
Stitch the front, back, sides and base together for the lining, leaving a gap in one of the base seams for turning out.
-
Step 8
Fuse the 4cm (1½) lightweight wadding strips to the wrong side of long F strip, but leaving 1cm (3/8in) of fabric extending beyond the wadding at one end. Fold the extending fabric over the wadding and press to neaten the end. Fold the strip lengthways, wrong sides together, and pin to the top edge of the bag, matching the raw edges. Trim the strip so that the unfinished end of the strip extends 2–3cm (¾–1¼in) over the neatened end then tuck it into the neatened end of the strip. Tack the strip in place.
-
Step 9
Assembly
Place the bag inside the lining, right sides together, with raw edges and seams matching, and sew around the top edge (where the strip is tacked in place). Turn the bag out through the opening in the lining and close up the opening with small hand stitches. Arrange the lining in the bag, so that the red F strip is even around the top. To prevent the lining from slipping, topstitch the edge of the bag around the F strip, sewing through all layers. Sew on the bag handles by hand.
