https://www.cutoutandkeep.net/projects/ribbon-dispenser • Posted by Shasta
I took an old (bulk) macaroni box, cut the top off, spray painted the inside white and the outside black. Then took a wire hanger and straightened it out - cut it to just slightly longer than the long end of the box. - Poked it through each side of the box and bent the ends up a bit. Then cut out the rectangular holes for the ribbon to dispense through! Looks much better when it's full of ribbon!
I took an old (bulk) macaroni box, cut the top off, spray painted the inside white and the outside black. Then took a wire hanger and straightened it out - cut it to just slightly longer than the long end of the box. - Poked it through each side of the box and bent the ends up a bit. Then cut out the rectangular holes for the ribbon to dispense through! Looks much better when it's full of ribbon!