Email: Password:

Not registered yet?

Add to Favorites Add Your Version

1. 

   gather all materials

2. 

   cut magazine into strips and tri-fold each strip gluing the folds down so that the strip lays flat

3. 

   begin weaving the strips together gluing down the overlaps. try to keep the strips as close together as possible so that there aren't big holes in the bag

4. 

   after you have a perfect square, repeat steps 2-3 for the 2nd side of the bag

5. 

   after 2 squares are made, hot glue the edges together leaving one edge for the opening

6. 

   cut card stock so that it is the length of one edge and width to fold and create a border on both sides and hot glue it on the edge of the bag

7. 

   repeat step 6 on the other 2 edges that have been glues together

8. 

   for the open edge, use two separate pieces of stock instead of one folded piece

9. 

   create two small holes in the top of each side of the bag to run yarn through as a strap... I hot glued the yarn on the inside of the bag for a little extra reinforcement

10. 

    tie the yarn, grab your bag and go!