Make and Share Craft Tutorials
 "Pin It")
About
Published
9 months ago
This tutorial requires some basic sewing knowledge and techniques. I made this tutorial in 2008 so it's a bit old.
Remember to download the pattern before making! :)
If you have any questions or comments, feel free to leave them below! Thanks for stopping by! :)
Tags
Crafts
Instructions
You Will Need
- Embroidery Thread (for the decorative stitches on body)
- Time
- Thread
- Button Or Plastic Safety Eyes
- Sharp Scissors
- Owl Pattern
- 0.5 yard Fabric Of Your Choice
- Polyester Stuffing
- Project Cost
- Cheap
-
1
Print out downloadable pattern and cut out the recommended number of pieces.
-
2
Sew the wings first! Put the right (or outsides) sides of the fabric together and sew around the edges EXCEPT the straight edge (this is where you'll flip it right side out after you're done sewing and stuff in the stuffing.)
-
3
Flip the wings inside out so that the right side is now on the outside.
-
4
Sew up the notches/darts (the V-shaped cutouts) on the body pieces. This will give the body some dimension so it's not all flat.
-
5
Now whipstitch (or stitching of choice) the belly and face pieces onto the front body piece. You can also sew/insert your eyes at this time too.
-
6
Put the right sides of the body pieces facing each other and pin the wings and feet.
IMPORTANT! With the right sides of the body pieces facing each other, sandwich the wing (and feet) pieces with the opposite tips facing each other in between the body pieces and pin the wings and edges together. Also, pin the feet pieces facing inward.
-
7
Sew! Remember to leave an opening for stuffing!
-
8
After you're done sewing, carefully flip it inside out and you can start stuffing!
-
9
Sew up the opening and voila! You have a cute pygmy owl!
Comments
Recent Favorites
