Make and Share Craft Tutorials
About
Published
over 4 years ago
Time
Difficulty
FINISHED SIZE: 35mm
Subscribe to the Photobeads Pattern Express (http://www.photobeads.eu/en/pattern-express) and receive all projects from Photobeads free of charge in your inbox monthly!
Crafts
Instructions
You Will Need
- 2 purple cylinder Bead(s) with orange lilies
- 2 silver plated Eye Pin(s) (at least 40mm long)
- 40 silver plated 4mm Jump Ring(s)
- 2 silver plated t-bar parts from Toggle Clasp
- Round Nose Pliers
- Flat Nose Pliers
- Wire Cutters
- Project Cost
- Reasonably Priced
-
1
String one bead on an eye pin. Slide the bead up against the eye of the eye pin. Using your round nose pliers create a loop at the end of the eye pin as close to the bead as possible. The bead should be ï¬rmly ï¬xed between two loops.
-
2
Make a chain of seven jump rings and use one more jump ring to connect the chain to the loop on one side of the bead. Repeat this with the other side.
-
3
Make a chain of three jump rings with a t-bar attached to one end.
-
4
Use one jump ring to connect the three loose chain ends together. One cuff link is now ready.
-
5
Repeat steps 1 to 4 for the second cuff link.
Good luck with your business!
Comments
Recent Favorites
