Slide a crimp bead onto 8" of wire.Make a loop,and string the end back through the bead.

Crimp the bead to hold the loop in place.Then string the beads in this order: 3 cream beads,1 gold tube bead,1 cream bead,1 silver bead,1 cream bead,1 silver bead,1 big green bead,1 silver bead,1 cream bead,1 silver bead, 1 cream bead,1 big green bead,1 cream,1 silver,1 cream,1 silver,1 big green,1 silver,1 cream,1 silver,1 cream,1 gold tube,3 cream.

Slide a crimp bead on the end;tuck the tail through a few beads,and make a loop identical to the first.

Crimp the bead,being careful not to catch the glass bead in the pliers.Trim the excess tail from the wire using the wire cutters.

Slide a big green bead onto an eye pin,and bend the wire at a right angle.Clip the wire so about 1/4" remains.

Form a loop with your round nose pliers.

With needle nose pliers,open the earring wire loop to connect the bead link.Close the loop.

Open the other side of the bead link to slide in both wire loops.Bend closed.Repeat all steps for second earring.