Cut Out + Keep

Mini Witch Hat

witch hat

https://www.cutoutandkeep.net/projects/mini-witch-hat • Posted by Mickie

did alot of looking around on line and stores for mini hats and thouh mmm i can do that. I went to a dallor store and got 8 party hats in a pack and made me two so far. i use a hot glue gun. and left over stuff i have from other projects, i should done a how to sorry it really easy, the most pain was getting burn by the hot glue gun. i know there some easy print out patterns on line. to me they were to small. small party hats are good. just get a soda box and trace out the lide. good luck and have fun.... i'm going to show how to soon how to make the witch hats.

You will need

Project Budget
Almost Nothing

Time

2 h 00

Difficulty

Nice & Simple
Medium img 1388 1284540637 Medium img 1392 1284540795 Medium img 1396 1284540952 Medium img 1389 1284540993 Medium img 1481 1285750352

Description

did alot of looking around on line and stores for mini hats and thouh mmm i can do that. I went to a dallor store and got 8 party hats in a pack and made me two so far. i use a hot glue gun. and left over stuff i have from other projects, i should done a how to sorry it really easy, the most pain was getting burn by the hot glue gun. i know there some easy print out patterns on line. to me they were to small. small party hats are good. just get a soda box and trace out the lide. good luck and have fun.... i'm going to show how to soon how to make the witch hats.

Instructions

  1. Small img 1460 1285750400

    all the stuff you need hot glue gun and sticks small party hat spray craft glue cutters pepsi box card borad. i like to reuse stuff if i can three sheets of felt

  2. Small img 1461 1285750470

    trace out the bottom of the hat on paper first to make a templates and then cut out the patterns then trace that on to card borad and cut that out

  3. Small img 1462 1285750813

    trace your rim on the back of two sheet of felt

  4. Small img 1463 1285750846

    then take your spray glue and spray alittl on the back of your felt. it's sticky

  5. Small img 1464 1285751299

    take your card borad rim and place it on top of sticky felt and push down and sooth it out even is this don't work felt is forgiving just peel it off and redo when it dry

  6. Small img 1465 1285752698

    5 min dry or sooner cut littl line on the sid of your rim all the way around because later you going to hot glue this. if you don't understant look at step 7.

  7. Small img 1471 1285752746

    hot glue more. when you done

  8. Small img 1473 1285753328

    take your other cut out rim and spray glue it on top of card borad side and make sure you cut littl line in side circle

  9. Small img 1466 1285753611

    now your done with your rim take out your felt and spray glue and party hat. open your party hat and lay flat and spray glue on the flat hat and then stick it to the last sheet of felt and sooth it on let dry for 3 min

  10. Small img 1467 1285753759

    cut out the shap but leave a in on one side of the hat so it over lap

  11. Small img 1469 1285753864

    it should look like this

  12. Small img 1470 1285753888

    hot glue on one side and fold back into a party hat, push down on the in side and out side of the hat

  13. Small img 1475 1285754023

    take the party hat and rim and start to glue the cut line into the inside of the hat

  14. Small img 1476 1285754109

    now your are done with the hat now you can accessor your hat.

  15. Small img 1481 1285754297

    i have a boa left over and glue it on the side of the rim. and have riddon and tulle. some my hat been painted so do what you like make a hat that no one have. injoy