About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
5 mins

for super geeky charms
here is the home page for squinkies marvel http://www.squinkies.com/marvel.html i used series one, the series two squinkies are see through and I didn't like the way they looked. you should be able to find them at any toy's R us.

Posted by Dr-Fumbles-McStupid Published See Dr-Fumbles-McStupid's 3 projects »
Tags

PrintEmbed
  • How to mold a clay pendant. Marvel Squinky Charms - Step 1
    Step 1

    Thread your wire through your needle, make sure one side is shorter than the other.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 2
    Step 2

    Position the needle in the bottom hole of the squinkie. Make sure it will come out near the center top.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 3
    Step 3

    use pliers (a thimble would probably work too) to push needle through squinkie.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 4
    Step 4

    when needle comes through the top, use the pliers to pull the needle all the way through. (the wire is really hard on the needle and the pliers don't help either, I went through five needles doing this project, dont think you are doing something wrong if they break)

  • How to mold a clay pendant. Marvel Squinky Charms - Step 5
    Step 5

    Pull the shorter side of the wire all the way through the squinkie

  • How to mold a clay pendant. Marvel Squinky Charms - Step 6
    Step 6

    Once the wire is all the way through position the needle to go back through. make sure it will end up in the hole at the bottom of the squinkie.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 7
    Step 7

    Push the needle back through to the bottom of the squinkie. if it doesn't go through the hole on the bottom, then pull it back a little bit and try re-angling it.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 8
    Step 8

    Once the needle is all the way through, use the pliers to pull the rest of the shorter strand through so you get a loop.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 9
    Step 9

    next clip the wires shorter and pull the loop small enough that there is barely space between the wire and the head.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 10
    Step 10

    Use the pliers to help tie a knot in the wire.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 11
    Step 11

    make sure to pull it tight.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 12
    Step 12

    use the pliers to shove the knot up into the hole at the bottom of the squinkie.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 13
    Step 13

    you should have all of the extra wire shoved into there. just keep working at it and it will all go in.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 14
    Step 14

    next pull the wire at the top to desired length.

  • How to mold a clay pendant. Marvel Squinky Charms - Step 15
    Step 15

    and now you have an adorable marvel charm :)

Made this project? Share your version »

Comments

hannah g.
hannah g. · Horten, Vestfold, NO · 74 projects
awh Tongue as cool as they are i thought you were going to show us how to make the little figures too (the "squinkies" as you call them o.o whatever they are)...ah well, theyre still very cool ^^
Reply

More Projects