https://www.cutoutandkeep.net/projects/made-shark • Posted by Daniel P.
Left to Right 1. Mix the two silicon together. You have to work fast, you have about one minute before it starts to harden. 2. Roll a ball. flatten it, and push the shark tooth in. Let set for 20 minutes 3. Mix one to one of resin together, add a scoop of thermochromatic pigment and stir together. Pour into the mold. **Work fast. 4. The tooth should be set in about 5 minutes, remove from the mold and put a screw eye in the top. Make sure you go fast before it sets. 5. Repeat until you have enough teeth. I used 7 6. Attach the teeth to your chain with jump rings.