About

Cost: $ $ $ $ $

Difficulty: • • • • •

Time: 40 mins

Link hammered rings together with knurled chain links to create an open, airy bracelet.
You can create these jump rings by opening links of the medium knurled antique copper chain, this project uses approximately 11 inches of chain to create 28 jump rings

All supplies and tools are for sale at Ornamentea.com

Posted by Alison M. [Ornamentea.com] from Raleigh, North Carolina, United States • Published 6th November 2009 • See Alison M. [Ornamentea.com]'s 26 projects »

Print • Embed

Jasmin added Large Loops Copper Bracelet to Bracelets 01 Oct 22:23
Jasmin favorited Large Loops Copper Bracelet 01 Oct 22:22
Danielle M. added Large Loops Copper Bracelet to Wire bracelets and other bracelets 28 Apr 09:06
Danielle M. favorited Large Loops Copper Bracelet 28 Apr 09:06
Charlene B. favorited Large Loops Copper Bracelet 22 Apr 14:24
Mary V. favorited Large Loops Copper Bracelet 20 Apr 13:07
My S. favorited Large Loops Copper Bracelet 19 Dec 02:29
Tierney R. favorited Large Loops Copper Bracelet 17 Oct 07:43

Step 1
To turn the chain into jump rings use your chain nose pliers to gently open each chain link and remove it from the chain. Continue until you have created 28 jump rings.
Step 2
With your chain nose pliers open the square jump ring and thread it through the lobster claw and one hammered ring. Close jump ring securely.
Step 3
With your chain nose pliers loop one knurled jump ring around two hammered rings. Close securely. Repeat until you have 7 knurled jump rings closed around the two hammered rings. Repeat to attach all hammered rings. Close bracelet by hooking lobster claw around one hammered ring as shown.