About

Cost: $ $ $ $ $

Difficulty: • • • • •

Time: 2h00

Quilting Guide
I wanted to take the opportunity to show you a technique on how to attach blocks that have already been individually quilted.

Posted by Pat B. • Published 21st November 2014 • See Pat B.'s 7 projects »

Print • Embed

Jeanie favorited How To Attach Blocks 13 Jan 12:27
alp.zoey added How To Attach Blocks to Sewing plushies and more 18 Aug 06:02
alp.zoey commented on How To Attach Blocks 18 Aug 06:01
Alissa B. favorited How To Attach Blocks 21 Apr 01:39
Chachee.rayna added How To Attach Blocks to Sew, Sew! 17 Dec 23:13
Pat B. published her project How To Attach Blocks 18 Aug 20:14

Step 1
Fabric Materials
•Ten (10) 9¼" x 9¼" quilted blocks
•One (1) 1¼" x WOF strip of choice of fabric (in this case I used •Pure Elements White Linen)
•Four (4) 1¼" x 19½" strip of same fabric chosen
•For Binding: Three (3) 1½" x WOF strips of fabric chosen (for further instructions on Binding, go here)
Step 2
The first thing, if you have not already done so, is to trim the excess batting that you have after quilting and to square your blocks so that they measure, in this case, 9¼" x 9¼".
Step 3
Once they are ready to be sewn, display them on the wall to see what arrangement you like best.
Step 4
Now you can start to construct the rows individually. It is important that you sew them WRONG side to WRONG side with a ¼" seam allowance. Yes, you read correctly! That is the first part of the trick here!
Step 5
Press seams open after sewing. You will have at least three layers to press, so press carefully.
Step 6
Now attach the two rows together, WRONG side to WRONG side again. If you you find that the intersections are too bulky and it's creating difficulty with your machine. You can CAREFULLY trim down the batting around those areas with the scissors
Step 7
Press the seam open.
Step 8
Grab all the 1¼" x WOF strips and fold in. Press ¼" on each of the long sides of the each strip.
Step 9
In this tutorial, what I'm going to show you is a different way to do sashing in "applique" style in order to cover unfinished seams and also bring more design and visual interest to your piece. As far as color for the thread, you can choose to use matching color thread for the top fabric.

First, attach the longer strip right on and center it with the seam that attaches the two rows. Pin as needed and top-stitch 1/16" away from the edge of the strip of both sides.
Step 10
Once you finish that strip, you can proceed to sew on the strips that go on top of the "vertical" seams, following the same process as the horizontal strip.
Step 11
After you have finished pressing, use a rotary cutter and ruler to trim the excess sashing. Now you are ready to bind it! If you have a preferred way of binding your quilt, go for it. In this case, I used the same technique I usually do on my Free Quilt Patterns. (Available at PatBravo.com)

Pretty simple, huh? This is an easy way to make a modern and colorful quilt. The decorative stitches add a nice and different touch to a solid fabric.