Gps Bag

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Measure your gps and add 2 inches on each side and make it 3 1/2 times as long. Cut out 1 piece each of main fabric, lining and interfacing. Then cut out a piece of fabric for the cord pocket and a lining piece.

• 

  Step 2

  Here I've given you the measurements for a garmin.

• 

  Step 3

  Here's the pocket.

• 

  Step 4

  This is for the tab.

• 

  Step 5

  Iron on the fusible fleece to the main fabric.

• 

  Step 6

  Cut a piece of fabric for the pocket top binding.

• 

  Step 7

  Sew the strip to the pocket right sides together.

• 

  Step 8

  Turn under the raw edge, pin, and sew the binding to the pocket.

• 

  Step 9

  Sandwich the pocket in between the right sides together of the bag with the pocket on the right side of the bag and the lining on top.

• 

  Step 10

  Make the tab. Round one end and sew right sides together.

• 

  Step 11

  Place the tab at the top and pin in place.

• 

  Step 12

  Sew together and leave a spot for turning. Turn.

• 

  Step 13

  This is what you will have so far. The next step is to sew the bottom of the pocket on to the bag and then topstitch all around.

• 

  Step 14

  Here is the topstitching. Sew on the button.

• 

  Step 15

  This is what it should look like!

Comments

Leave your comment

Tina T. · 25 projects 23rd April 2012

Thanks! I looked for a pattern, but I couldn't find one with a pocket.

Reply

Ms. Nikell · Charlotte, North Carolina, US · 52 projects 23rd April 2012

This is a really neat idea! I'll have to make one of these (^_^)

Reply