Cut Out + Keep

Flower Filled Windowbox

Dress your window ledges for a Spring flower spectacular…

https://www.cutoutandkeep.net/projects/flower-filled-windowbox • Posted by Dremel

Make your balcony, window ledge, terrace or patio the place where your home greets the sun with a gorgeous flower-filled windowbox. Simply buy the items listed below to carve and decorate it and follow our instructions. Then plant your windowbox with Spring flowers and enjoy the beauty of your unique celebration.

You will need

Project Budget
Cheap

Time

1 h 00

Difficulty

So-so
Medium screen shot 2012 04 04 at 00.24.22 Medium screen shot 2012 04 04 at 00.24.07

Description

Make your balcony, window ledge, terrace or patio the place where your home greets the sun with a gorgeous flower-filled windowbox. Simply buy the items listed below to carve and decorate it and follow our instructions. Then plant your windowbox with Spring flowers and enjoy the beauty of your unique celebration. You can check out more fantastic projects on the Dremel website.

Instructions

  1. Small screen shot 2012 04 04 at 00.22.44

    Mark out your design onto a piece of paper and then trace this onto the centre of one of the side panels of the window box in pen. Then, take your Dremel 7700 and attach the multi-chuck and the engraving cutter 111 to carve the outline of your design into the wood.

  2. Small screen shot 2012 04 04 at 00.22.50

    Then, remove the engraving cutter and insert the Dremel tungsten carbide cutter 9905 to gauge out and remove the wood from within the lines of your design.

  3. Small screen shot 2012 04 04 at 00.23.43

    Once this is done, remove the tungsten carbide cutter and insert the Dremel fine grit sanding band 432 and smooth down any rough edges to your design. For detailed smooth sanding, where you need to be careful of the delicate nature of your project, use the SpeedClic mandrel abrasive brushes 511S or 512. These adjust to the outlines of your design and are useful where the sanding bands may be a little too aggressive or the design is too delicate for the sanding bands to be able to get into all the nooks and crannies.

  4. Small screen shot 2012 04 04 at 00.23.49

    Using a suitable roller, paint the planter and allow it to dry thoroughly. Following the manufacturers instructions, apply gold ‘size’ to the carved motif, then gild the carved area with silver metal leaf to create anelegant look worthy of any season.

  5. Small screen shot 2012 04 04 at 00.24.32

    Finally, protect your planter with a couple of coats of exterior varnish.