https://www.cutoutandkeep.net/projects/dyed-n-braided-necklace • Posted by edie d.
I tried my hand at going eco-green and recon'd an old Tshirt into this dyed n' braided fabric necklace. So fun! I can't decide how I like to wear it best. Oh, and want to give a shout out to OOLAMOOLA that posted a super cool tutorial for a braided necklace that inspired me to make my own. It's a very nifty site, worth a gander, friends!
I tried my hand at going eco-green and recon'd an old Tshirt into this dyed n' braided fabric necklace. So fun! I can't decide how I like to wear it best. Oh, and want to give a shout out to OOLAMOOLA that posted a super cool tutorial for a braided necklace that inspired me to make my own. It's a very nifty site, worth a gander, friends!
Start with cutting off the bottom hem of your shirt, then cut nine 1" wide strip loops. This shirt had side seams but it's better if the shirt is a continuous knit without seams.
Here's some of the stages: 1- Open the loops on one side. I staggered this spot so those awkward side seams would land in different spots of the necklace. Then I slid beads onto the fabric strips to cover the seam bulk. 2- Knot the strips in a few places. 3-Bind with rubber bands in a few more places. 4-I dyed it first with 1/2 bottle RIT tangerine dye mixed in 1 gallon of very hot 140º water for about 15 min. If the tap water's not hot enough, just heat some in the tea kettle or microwave. 5-Then the knots and rubber bands are removed. 6-Next, mix 2Tbsp of RIT Rose Pink in an additional gallon of hot water and immerse the fabric strips for about 5 minutes.
After removing from the dye bath, rinse until the water runs clear and hang dry. OK, ready for assembly! Hold the ends of the 9 strips together with a clamp or tape and start braiding 3 strips at a time the entire length.
Stitch the ends with a moderately tight stitch back and forth. At this point, I was planning to cut the fringe off and attach a ribbon tie but decided the fringe was kinda fun so I'm working it for now.