Dvd Case Tent Or Lean To

Turn at DVD case into a tent or lean-to for a fairy garden or small action figures.

https://www.cutoutandkeep.net/projects/dvd-case-tent-or-lean-to • Posted by KMOM14

You will need

Dvd Case with plastic cover on front and back Popsicle Sticks Glue Gun and glue sticks

Project Budget

Time

Difficulty

Description

Instructions

1. 

   Remove the paper insert from the case.

2. 

   Start by inserting one of the sticks vertically lining up towards the top and then glue then lift of the edge down with the hot glue. Then insert a stick horizontally on the bottom. Continue then to insert sticks vertically until you get to the middle.

3. 

   Put another stick in horizontally at the bottom and push the other stick slightly out on the other side so each side has approximately the same amount of the stick peeking out on each side. Then continue inserting sticks vertically until the case is full, then lift of the last stick and use the hot glue gun to glue the stick to the case. Repeat the above steps for the other side.