About

Cost
$ $ $ $ $
Difficulty
• • • • •
Time
45 mins

Create a heart-shaped Valentine omelette for your Love!
A great way to change up a traditional omelet with cheap resources.

Posted by ZanyDays from Twin Falls, Idaho, United States • Published See ZanyDays's 112 projects »
Tags

PrintEmbed
  • How to make a molds. Diy Valentine Omelette Shaper - Step 1
    Step 1

    Cut two 1-1.5 inch strips from the paper, lengthwise.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 2
    Step 2

    Staple the ends together.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 3
    Step 3

    Rip strips of aluminum foil and begin to fold around the strips.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 4
    Step 4

    There will be quite a few raw edges that you want to cover up.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 5
    Step 5

    Fold your aluminum-covered shape in half. Take one huge piece of aluminum foil that is twice the length of the folded piece and cover the circle so there are no raw edges.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 6
    Step 6

    You'll fold

  • How to make a molds. Diy Valentine Omelette Shaper - Step 7
    Step 7

    And roll

  • How to make a molds. Diy Valentine Omelette Shaper - Step 8
    Step 8

    Fold

  • How to make a molds. Diy Valentine Omelette Shaper - Step 9
    Step 9

    And roll

  • How to make a molds. Diy Valentine Omelette Shaper - Step 10
    Step 10

    Until the whole circle has been covered.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 11
    Step 11

    Then you want to fold the shape in on itself until there is no more foil left to roll.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 12
    Step 12

    Press down so the bottom becomes a flattened edge.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 13
    Step 13

    Shape the circle back into the heart shape it was before yo covered it in foil.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 14
    Step 14

    Heat the burner to low-med heat. Low is best.
    Using one hand, press down on the mold and with the other hand pour in the omelette mixture. Hold down the mold for 30 seconds.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 15
    Step 15

    If a little bit of egg mixture leaks out it's okay. The majority should stay in.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 16
    Step 16

    After about a minute, add your toppings and pour in some water. Cover immediately. The trapped steam will partially cook the top of the omelette so that you can more easily remove the omelette mold.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 17
    Step 17

    After a couple of minutes, cut around the edges with a knife.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 18
    Step 18

    Peel the mold back with a fork to be sure that your edges are clean.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 19
    Step 19

    Then gently pull up on the mold and remove it from the omelet.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 20
    Step 20

    Trim it to perfect the shape you intended the omelette to be - in my case, a heart.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 21
    Step 21

    Set the mold aside. You can clean it or throw it away - recycling the aluminum.

  • How to make a molds. Diy Valentine Omelette Shaper - Step 22
    Step 22

    Broil for 30 seconds to a minute to thoroughly melt the cheese and serve!

Made this project? Share your version »

Comments

Amberlynn Reid
Amberlynn Reid · Kathmandu, Central Region, NP · 67 projects
thats just so tasty and so beautiful and pretty!!!!
Reply

More Projects