Diy Statement Bag

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  You will need a novelty container, a piece of leather, ruler, scissors, a pen, screwdriver, screws, a soldering iron or drill and adhesive velcro dots

• 

  Step 2

  Measure a piece of leather 120 by 6 cms

• 

  Step 3

  Now just cut the leather

• 

  Step 4

  Fold in half with long edges together then pin and sew 3 mm from the edge

• 

  Step 5

  Cut the excess of leather

• 

  Step 6

  Mark the place where you will attach the leather on each side of the container

• 

  Step 7

  Using the soldering iron make a hole in the leather and the container on each side. You could also use a drill instead

• 

  Step 8

  Measure and cut a strip of leather 13 by 4 cms

• 

  Step 9

  To keep the bag closed we`ll attach the strip of leather to the back of the container. Create 2 holes on the container and leather as shown.

• 

  Step 10

  Use the screws to fasten the leather strip to the back of the container

• 

  Step 11

  Stick one velcro dot to the leather and one to the bottom front of the container

• 

  Step 12

  This is how it should look like once it is done

Comments

Leave your comment