https://www.cutoutandkeep.net/projects/diy-magazine-clip-magnets • Posted by Erin P.
Lay the magnet sheet flat and brush enough glue to place your clippings onto. Place your magazine clips onto the glue you have spread and immediately spread glue over top of the clippings.
Wait for the glue to dry completely. With an X-Acto knife, cut around the clippings. *note you do not have to cut all the way through the magnet. Simply cut through the top layer, bend the rest back and it should easily tear.
You may want to brush a little glue around the edges to prevent the paper from separating from the magnet.