D.I.Y Cardboard Jewelry Organizer

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  These are the materials you need for this project.

• 

  Step 2

  These are the templates for the box and the lid.

• 

  Step 3

  Take a square piece of cardboard, you can use rectangular if you want.

• 

  Step 4

  Using the template draw four lines in the edges (as shown in the picture). They must be equal in size and angle.

• 

  Step 5

  Cut along the lines.

• 

  Step 6

  Make some gentle slits on the cardboard, remember don't cut all the way through.
  This helps you to fold the box nicely.

• 

  Step 7

  I've made half cut lines on all four sides.

• 

  Step 8

  Cut out the corners as the picture. Cut along the yellow lines you see in the picture.
  http://www.cutoutandkeep.net/projects/diy-cardboard-ring-organizer

  As the link above band up the corners and glue them to make the box.

• 

  Step 9

  Using the same technique I've made a lid.
  When you make the cuts on the corners keep it a bit smaller (1.5 - 2cm) than the box.
  Then wrap it with fabric or wrapping paper.

• 

  Step 10

  I've cut out two pieces of cardboard.
  Wrap them with wrapping paper if you want.

• 

  Step 11

  Then glue them in the box to make separators.
  The box is ready.
  Enjoy.

Comments

Leave your comment