Bracelet Knotting Instructions

  ✂︎

Favorite

Comment

List

       

Share

• 

  Step 1

  Step 1: Slide beads and tie knots.

  1st, slide a 14mm agate bead onto the brown thread. Position the bead in the middle of the thread.

  2nd, put the two threads together side by side and tie a knot on the side of the bead.

  3rd, tie a second knot with the two cords on the other side of the 14mm agate bead to keep it in place.

  4th, slide a 12mm agate bead onto the beige thread and then tie a knot with both cords as in the previous step.

• 

  Step 2

  Step 2: Continue inserting beads and making knots.

  1st, slide the remaining beads and tie knots after each one alternating on which cord your put the bead on.

  2nd, you should get something similar as the image below.

• 

  Step 3

  Step 3: Tie sliding knots.

  1st, make a loop with the brown cord and insert the beige cord through the loop.

  2nd, continue by wrapping the brown cord around the beige cord one more time. You should have two coils around the beige cord.

  3rd, pass the brown cord end back through the two loops.

  4th, pull the end tightly to create the sliding knot.

Comments

Leave your comment