Make and Share Craft Tutorials
Big Hallo Kitty Wall Stamp/Recycle Your Stuff!!!
About
Published
over 4 years ago
Time
Difficulty
Posted By
When I moved in my new flat I had to paint the Walls,and to put some floors in it.
After that I had a lot of garbage lying around.
First I thought of throwing it all away,but then I had the idea of recycle some parts of it.
I wanted to decorate my bathroom and the walls in Hello Kitty style.
Cause I am a hughe Fan and have a lot of Bath-accessoires from her.
So I decided to make a hughe stamp out of the garbage-parts.
Tags
Crafts
Instructions
You Will Need
- Project Cost
- Cheap
-
1
First of all you need a picture of something you wanted to make as a stamp.
Then you need a piece of laminate which you have left. (or maybe you can use other stuff like maybe the cover of an old book..)
then you need a transparent sheet of paper.
A piece of an old carpet (the one you lay in your kitchen or bathroom),
an empty Roll of double-faced adhesive tape,a permanent marker and a cutter,and a hot-melt-gun. -
2
Put the tranparent sheet of paper on your picture and paint the outlines with your permanent marker.
-
3
Now cut out the whole motive with your cutter. Make sure to leave some points so it all stays together.
-
4
Take the rest of the carpet and turn on the backside.
Use your permanent Marker and the cut out Motive as pattern to paint on the carpet backside. -
5
cut out all the parts and use your
hot-melt-gun to glue the stuff on your piece of Laminate.Make sure to remove all glue parts which you don´t need.
-
6
Use the old transperent sheet Model to find out in which place you must glue the eyes of the figure.
-
7
Take your old and emty roll of double-faced adhesive tape and glue it on the backside of the laminate.
(use the hot-melt-gun) ;)
-
8
Now you can use your new stamp ^^
Comments
Recent Favorites
