https://www.cutoutandkeep.net/projects/bal-mania • Posted by Charley H.
First of all, you need to get the quasi-braided look along the neckline and about 26cm along the middle of each sleeve, starting at the cuff.
Glue your gold braided trim to your fabric in the pattern to the left. Make your pattern about 4cm wide and copy those steps.
The braiding on your sleeves and collar should look like this:
Now, for the epaulettes. Cut out two of the following shape in your flat foam wadding...
...and four of the following in gold lamé.
Place your wadding on top of a piece of lamé, in the centre, so that you have 1cm’s seam allowance all round. Then place another piece of lamé on top, mirroring the first, so that the wadding is in the centre and sandwiched between the two layers. Stitch the two layers of lamé together, 1cm from the edge, ideally by machine. You can do it by hand, but make sure it’s tight and secure. Repeat this process with the remaining piece of wadding and two pieces of lamé. Cut away some of the excess fabric around the edge
Cut out two sets of 40cm of your fringing and fold them back on each other, so that you have two double-thickness sets of fringe 20cm in length. Cut out as many 15cm pieces as possible out of your gold and brown leather string. Glue or stitch down at fairly regular intervals along your fringing. When your glue has dried, stitch the top of your decorated fringing along the wide, round end of each of your epaulettes.
Stitch your gold trim around the edge of each of your epaulettes and over the side of the fringing.
Stitch your epaulettes along the shoulders of your jacket, with the fringing covering the top of the sleeves.