About
With Shaun the Sheep
(Picture with the lights off and spaceship light on)
My inspiration for this project was Heather of Dollar Store Crafts creation:
except I made mine is a nite lite with a mini touch light from the Dollar Tree, made Shaun The Sheep to be abducted by aliens and my space ship is removeable and can "fly" off on its own (picked up by the string).
While Shaun the Sheep is larger than the ship and it doesn't seem like it would be possible for the UFO to abduct him, keep in mind it is alien advanced technology at work here.
The components for this are:
UFO made from Dollar Store items (be sure to save the plastic covering off of the mini-touch light as it will be glued to the top of the glass)
Shaun The Sheep - here is a link to the how-to that I posted at Cut Out and Keep or you could use a small plastic animal or a small action figure.
Tags
-
Kay T. favorited Alien Abduction Nite Lite
17 Nov 22:39
-
Skudge favorited Alien Abduction Nite Lite
13 Feb 10:59
-
BlooEatsZombies favorited Alien Abduction Nite Lite
26 Nov 21:27
-
Step 1Trim the edge off the outside of the covering off of the mini-touch light.
-
Step 2Apply glue to the bottom of the glass then place the plastic off of the mini touch light upside down on it like so:
-
Step 3Put a 12 oz can of soda or other soft drink (I guess you could use a beer if you were so inclined) on inside the top off the mini-touch light and allow the glue to dry.
-
Step 4Put the lid on the felt and use a pen to trace around the circumference, then cut out the felt where you traced.
-
Step 5Turn the lid upside down, apply glue and then place the felt in the center and smooth it down.
-
Step 6Place Shaun or whatever critter that is to be considered for abduction in the center of the lid, then place the glass over the top of them and put the spaceship inside the the top off of the mini-touch light and you have yourself an Alien Abduction Nite Lite!
Versions
Comments
