How To Add In Seam Pockets

Learn how-to add in seam pockets in #TechniqueTuesday with An from Straight Grain and then make her super simple skirt with lining.

Step 1
Download the free pattern for the pocket pieces here:
http://tinyurl.com/freepocketpatterns
Print it at 100%, and use the test square in the top left corner to check whether you printed correctly.
Step 2
Cut 2 pairs of pocket pieces (mirrored). Seam allowance is included in the pattern.
Serge or zigzag the round edges (not the straight one).
Step 3
Place one of the pocket pieces on the front panel of the skirt or dress with right sides together. Make sure not to place the pocket piece too high (keep the seam allowance at the waist in mind if you are making a skirt, for instance).
Stitch the pocket in place with a 0.7 cm (1/4”) seam allowance.
Step 4
Use the same method to attach one pocket piece to the other side of the front panel, and the remaining two pocket pieces to the back panel.
Step 5
Serge or zigzag the side seams of front and back, including the edge of the pocket pieces as you move down.
Step 6
Fold each pocket piece away from the front panel, and press the seam towards the pocket. Topstitch close to the seam.
Step 7
Put the front and back pieces with right sides together, matching up the pocket pieces. Pin along the side edges of the dress and around the edge of the pocket pieces. Stitch along the side side seam, around the pocket, and again down the side seam. At the top and bottom of the pocket, backstitch twice to give
extra strength.
Step 8
With your scissors, carefully make a small diagonal cut in the side seam of the dress (not the pocket) near the top and bottom of the side pocket. This will make it easier to press the side seams open.